How to Store Your Funko Pop! Vinyl Figures When Moving: A Step-by-Step Packing Guide
By Fugitive Toys: Home to the largest selection of Funko Pop Vinyls | Published: 2026-09-12
Category: How-to Guides
Learn how to pack and move your Funko Pop! vinyl figures safely with our step-by-step guide, covering materials, box protection, and common pitfalls.
Quick answer
To protect your Funko Pop! vinyl figures during a move, use small boxes, wrap each figure in bubble wrap, and secure the box with packing tape. Keep them upright and avoid stacking heavy items on top. For extra protection, use Pop! protectors for any figures with boxes.
Moving is stressful enough without worrying about your Funko Pop! collection. Whether you're relocating cross-town or across the country, a few simple precautions can keep your figures and their boxes in mint condition. This guide walks you through the entire process, from gathering supplies to unpacking at your new place.
The key is to treat every figure as if it has a fragile box, because even a minor dent can reduce its collectible value. With the right materials and technique, you can pack your entire collection safely and efficiently without spending a fortune.
What you'll need: essential packing supplies
Before you start, gather small- to medium-sized cardboard boxes (roughly 12x12x12 inches or smaller). Large boxes get too heavy and risk crushing figures at the bottom. You'll also need bubble wrap, packing paper, packing tape, and a marker for labeling. If you have Pop! protectors (plastic shells), use them for any figures with boxes you want to keep pristine.
Consider using original shipping boxes if you've kept them. They're perfectly sized for standard Pop! figures. If not, any small box with enough space for wrap and cushioning works. Avoid using trash bags or loose containers where figures can slide and collide.
- Use boxes no larger than 18x18x18 inches to prevent overloading.
- Bubble wrap is better than paper for protecting box corners.
Step 1: Prepare your figures
Start by inspecting each figure. If you're storing figures out of box, gently wipe them with a soft, dry cloth to remove dust. For in-box figures, decide whether to keep the box on or off. Keeping the box gives extra protection but takes more space. If you store out of box, save the boxes flat and keep the plastic insert with each figure.
One common mistake is wrapping multiple figures together in one sheet of bubble wrap. This can cause them to knock against each other. Instead, wrap each figure separately to ensure no direct contact.
- Check for loose parts or accessories and secure them with a small rubber band or tissue.
Step 2: Wrap each figure individually
For in-box figures, wrap the entire box in a layer of bubble wrap. Pay extra attention to the corners, which are most vulnerable to dents. For out-of-box figures, wrap the figure itself in bubble wrap, then place it in a small zip-lock bag or wrap with tissue paper before boxing.
Use a generous amount of bubble wrap—enough to form a cushioning layer that can absorb impact. Avoid over-tight wrapping, which can put pressure on the figure. You want a snug but not tight fit.
- If you have Pop! protectors, you can skip bubble wrap for the box and just use bubble wrap on the outside.
Step 3: Pack the box correctly
Line the bottom of the box with crumpled packing paper or bubble wrap. Place wrapped figures upright in a single layer, standing them on their bases. Fill any gaps with packing paper to prevent shifting. Do not stack figures on top of each other unless they're in sturdy protectors and you have no other option.
When the box is full, add a layer of packing paper on top and close it. Shake the box gently—if you hear movement, add more filler. The goal is a box where nothing moves when shaken.
- A full box is a safe box—space inside allows movement, which causes damage.
Step 4: Seal, label, and load
Seal the box with strong packing tape along all seams. Use a marker to write “Fragile” and “Funko Pops” on the top and sides. Indicate which side should stay up. If you're using multiple boxes, number them and make an inventory list attached to your moving notes.
When loading the moving truck, place these boxes on top of heavier items, not underneath. Never place anything heavy on top of the boxes. If you're moving by car, keep the boxes in the cabin if possible—it's less bumpy than the trunk.
A common mistake is overloading a box or placing it under a stack of books. Even with bubble wrap, compression can crush figures and crack boxes.
- Use a separate box for especially valuable or rare figures, and carry it with you.
Packing checklist: avoid these common mistakes
- Mistake: Wrapping multiple figures together: This causes figures to rub and knock during transit, leading to paint scuffs and box damage. Always wrap each figure individually in at least one layer of bubble wrap.
- Mistake: Using large boxes that get too heavy: Large boxes allow excessive shifting and become heavy, increasing the risk of crushing figures on the bottom. Stick to boxes that hold 10–15 figures max and keep the weight manageable.
- Mistake: Placing boxes under heavy items: Stacking boxes under furniture or other heavy loads can crush boxes and cause dents. Always load Pop! boxes on top of other items and mark them 'Fragile'.
- Mistake: Not filling empty spaces: Empty space lets figures shift and bump against the box walls during the move. Use packing paper or bubble wrap to fill every gap so nothing moves when you shake the box.
Product facts
- Looney Tunes Pop! Vinyl Figure Tweety in Witch Costume [1676]: Features Tweety dressed in a witch costume for a seasonal, whimsical look. Part of the Funko Pop! Animation series. This figure's box has a seasonal theme, so preventing creases or dents is crucial if you plan to display it after the move or keep its value intact.
- Demon Slayer Pop! Vinyl Figure Spider Demon Mother [Glow Chase] [Special Edition] [1573]: Special Edition Glow Chase variant with glow-in-the-dark details. Numbered 1573 in the Pop! Vinyl series. Chase variants are rarer and more valuable. Extra care in packing—using a protector and a separate box—can preserve its condition and resale potential.
Moving your Funko Pop! collection doesn't have to result in damaged boxes or broken figures. With a bit of planning and proper packing, you can ensure your collectibles arrive safe and sound. For rare or chase pieces, consider extra protection like Pop! protectors and carry them yourself. Happy moving, and may your Pops stay box-fresh!

![World of Warcraft: The War Within Pop! Vinyl Figure Illidan [1101]](https://fugitivetoy.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F140%2Fimport-1787722098011-88187535.jpg&w=400&q=82)

![Funko Proto - Launchpad McQuack [Darkwing Duck] Prototype](https://fugitivetoy.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F140%2Fimport-1787722090972-423590563.jpg&w=400&q=82)